Bench Programming Services
Discovery / Discovery II
- Remote programming
- Alarm system synchronization
- ECM engine computer programming
- Used modules
- VIN correction
- New modules
- Software flash updates
- Immobilizer alignment
- BCU programming
- Used modules
- Unlocked for programming with dealer tools
- or programmed for Plug-and-play install
- Security alignment
- Option configuration
- Odometer correction
- used BCU or instrument cluster
- More
Freelander
- Key programming
- Remote programming
- Immobilizer (SAWDOC) programming
- New modules coded
- Used modules programmed
- ECM engine computer programming
- Used modules
- VIN correction
- Immobilizer alignment
- New module programming and coding
- Software updates
- More
Range Rover / Range Rover HSE / Range Rover Sport
- Key programming
- Key cutting / Key blanks
- replacement remote key shells
- Remote programming
- ECM programming
- Used and new modules programmed
- Plug-and-play programmed ready to run
- VIN correction / emissions ready
- BeCM body computer programming
- Unlocked for dealer programming
- Programmed plug-and-play ready
- Odometer correction (used BeCM or instrument cluster)
- Options coding
- units in stock ready for exchange
- Instrument clusters
- used modules odometer correction
- EWS immobilizer programming
- Modules in stock
- More
Mobile Services
- New ECU programming
- ECM, BCU, BeCM, SRS, ABS, EWS, etc
- Flash updates / TSB's
- Key programming
- Remote programming
- SRS fault diagnosis
- Immobilizer fault diagnosis
- Air-Ride height adjustments
- More
Key Replacement
Lose all of your keys? Did the dealership tell you it would
be weeks until they can get a replacement key for your Rover?
Contact us. We can get you back on the road sooner.
Used parts available
We have a large inventory of good used ECU's for most makes.
FAQ's and tips
Used BeCM BCU or instrument cluster
When installing a used BeCM or instrument cluster, be sure the odometer value on the used module is less than your actual mileage. The odometer is stored in both modules and when synchronizing the 2 modules the odometer will go to the higher value. If this has already happened to you, we can correct it on the bench. We will need the BeCM and the cluster.
When installing a used BeCM or instrument cluster, be sure the odometer value on the used module is less than your actual mileage. The odometer is stored in both modules and when synchronizing the 2 modules the odometer will go to the higher value. If this has already happened to you, we can correct it on the bench. We will need the BeCM and the cluster.
I cannot license my car because of a VIN mismatch. Why?
If you live in a metro area with environmental quality or DEQ inspections to license your vehicle, the VIN number in the engine computer must match your actual VIN. In some areas this may only apply to 2004 and newer vehicles. If you have failed to pass a VIN inspection, contact us.
Why did the dealer tell me I cannot install a used part?
Often this is true for the dealership and the equipment they are provided. The manufacturers want to sell new parts. So, they often "lock" an ECU once it is programmed to one vehicle. When the dealer tries to program it to another vehicle, their equipment will not allow it. Our specialty is "unlocking" these modules so they can be programmed again. Or, better yet, we can often program them in-house so they are ready to go when you install them. No trip to the dealer for programming will be necessary.
Factory tools, trained technicians.
Testbook T4, JLR IDS, GEMS 6 7 8, P38, ERR7109
80783A, NNN100600 0261204902,NNN100640,NNN105961, YWC000310,
73004311/A EWS3.D EWS Lear YWC500231 YWC500232 YWC500233 YWC500234
SAWDOC