VW / Audi ECM and Immobilizer Programming
You can send us your new, used, or reman ECM and/or Instrument Cluster and we can program it and have it ready to run when you install it in the new vehicle. This can save you a trip to the dealership. Furthermore, dealers will can not program used PCM's.
Bench Programming
Flash restoration / repair
- ECM does not communicate after aftermarket tune; repaired
- P0601 - 16985 - ECM internal control module - memory checksum error repaired
- P1640 - 18048 - ECM internal control module - EEPROM error repaired
ECU programming - new and used parts
- ECM - Engine computer
- EDC15
- EDC16 EDC16J34 EDC16U31
- ME7 ME7.1 ME7.5
- ME9 MED9.1
- ME17 ME17.5.6
- MED15
- MED16
- MED17.5.2
- Simos 6
- Simos 8
- More
- Immobilizer
- KESSY - Touareg - A8
- Keys / Remotes programmed
- Instrument cluster
- Immobilizer adjustment
- Keys programmed
- Odometer correction
- TCM
- DL501 Gen1 & Gen2
- DQ200 MQB
- DQ200G2
- DQ250 - 6A/6F/6V-MQB
- DQ400E
Mobile Service
- All Models
- ECM programming (ME, EDC)
- Key / remote programming
- Coding - ABS, SRS, Central Convenience, Comfort Control, etc
- SRS airbag fault diagnosis
- Immobilizer system fault diagnosis
Used parts available
We have a large inventory of good used ECU's for most makes. Check our inventory here.
FAQ's and tips
I cannot license my car because of a VIN
mismatch. Why?
If you live in a metro area with environmental quality or DEQ inspections to license your vehicle, the VIN number in the engine computer must match your actual VIN. In some areas this may only apply to 2004 and newer vehicles. If you have failed to pass a VIN inspection, contact us.
Why did the dealer tell me I cannot install a used part?
Often this is true for the dealership and the equipment they are provided. The manufacturers want to sell new parts. So, they often "lock" an ECU once it is programmed to one vehicle. When the dealer tries to program it to another vehicle, their equipment will not allow it. Our specialty is "unlocking" these modules so they can be programmed again. Or, better yet, we can often program them in-house so they are ready to go when you install them. No trip to the dealer for programming will be necessary.
If you live in a metro area with environmental quality or DEQ inspections to license your vehicle, the VIN number in the engine computer must match your actual VIN. In some areas this may only apply to 2004 and newer vehicles. If you have failed to pass a VIN inspection, contact us.
Why did the dealer tell me I cannot install a used part?
Often this is true for the dealership and the equipment they are provided. The manufacturers want to sell new parts. So, they often "lock" an ECU once it is programmed to one vehicle. When the dealer tries to program it to another vehicle, their equipment will not allow it. Our specialty is "unlocking" these modules so they can be programmed again. Or, better yet, we can often program them in-house so they are ready to go when you install them. No trip to the dealer for programming will be necessary.
Factory tools, trained technicians
VAS-PC VAS5052 VAS5052A VAS5054 ME7 ME7.1 ME7.5 ME9 ME 9.1 ME9.5 EDC15 EDC16 BENZIN
*NOTE: this is not a service for lost keys. If you have a lost key situation, CONTACT US. We will need all the existing keys sent with the module when programming immobilizer equipped modules.